2
Holding the handle, lift the right edge upward (as shown in the diagram),
and slide it to the front to remove.
7
Repositioning the devices
To convert the server to a rackmount model, you must reorient the following 5-inch bay stor-
age bay components:
•
all 5-inch internal devices
•
all blank units
•
Operator panel
See the following diagram to identify their new orientation:
1
Disconnect all internal cables and power cables from the operator panel
and any other 5-inch internal devices.
12
Conversion procedure
Operator panel
Before
[
]
5-inch storage bays
After]
[