2. Turn the vertical aiming screw (C) until the level
bubble (D) is lined up with zero.
6-40
1. Turn the horizontal
aiming screw (A)
until the
indicator (B) is
lined up with zero.
Front Turn Signal
1. Once the headlamp assembly has been removed,
reach down from the top of the vehicle and, while
pressing the lock tab on the socket, turn the socket
-
one
quarter turn counterclockwise and pull it out.
3. Replace the bulb and turn the bulb assembly back
into place.
2. Remove the old bulb by
pulling it straight out of
the socket.