Table of Contents
Advertisement
CAUTION:
Using a match near a battery can cause battery
gas to explode. People have been hurt doing this,
and some have been blinded. Use a flashlight
if you need more light.
Be sure the battery has enough water.
You don't need to add water to the ACDelco
battery installed in every new GM vehicle.
But if a battery has filler caps, be sure the right
amount of fluid is there. If it is low, add water to
take care of that first. If you don't, explosive gas
could be present.
Battery fluid contains acid that can burn you.
Don't get it on you. If you accidentally get it in
your eyes or on your skin, flush the place with
water and get medical help immediately.
CAUTION:
Fans or other moving engine parts can injure
you badly. Keep your hands away from moving
parts once the engine is running.
R
5. Check that the jumper cables don't have loose or
missing insulation. If they do, you could get a shock.
The vehicles could be damaged too.
Before you connect the cables, here are some basic
things you should know. Positive (+) will go to
positive (+) or to a remote positive (+) terminal
if the vehicle has one. Negative (
heavy, unpainted metal engine part or to a remote
negative (
Don't connect positive (+) to negative (
get a short that would damage the battery and maybe
other parts too. And don't connect the negative (
cable to the negative (
because this can cause sparks.
-
) will go to a
-
) terminal if the vehicle has one.
-
) terminal on the dead battery
-
) or you'll
-
)
5-5
Advertisement
Table of Contents
