Zenith HydroTap G5 Quick Start Installation Manual page 18

SECTION 9: Install the CO2 cylinder and regulator
Adjust the regulator
Universal G5 regulator
• Check the regulator is turned all the way OFF (anti-clockwise).
• Turn the gas ON using the cylinder valve (2.64Kg cylinder), (anti-clockwise).
• Turn the regulator control knob (clockwise +) to adjust the outlet pressure
to 3.0 bar on the outlet pressure gauge.
Turning the regulator ON and OFF
1.2Kg cylinder non-adjustable regulator
Regulator
valve
• Turn the regulator valve fully clockwise to turn ON the gas.
• Turn the regulator valve fully anti-clockwise to turn OFF the gas.
Quick Start Installation Guide
18
807120NZ v1.00 01.21 G5 C CS Quick Start Guide
Outlet
pressure
Regulator
control
knob
ON
OFF