Zenith HydroTap G5 Quick Start Installation Manual page 12

C40 CS Home, C Home models
• Cold air is drawn in through the inlet vent and lower gap provided by the
door buffers.
• Inlet vent is mounted over cupboard side, door or floor cut-out.
• Warm air is exhausted through upper gap provided by the door buffers.
Air outlet
Inlet vent
Air inlet
All models
If cupboard temperature exceeds 35°C, additional ventilation is required.
Contact your Zenith service provider for options (including additional vents
and fan kit).
Quick Start Installation Guide
12
807120NZ v1.00 01.21 G5 C CS Quick Start Guide
SECTION 6: Set up the ventilation
4
mm door buffers
(supplied)