KTM 890 Adventure R US 2021 Owner's Manual page 359

Faults
The engine dies during the trip
The ABS warning lamp lights
up
High oil consumption
Headlight and position light are
not functioning
Turn signal, brake light, and
horn are not functional
Time is not displayed or not
correctly displayed
12-V battery discharged
Possible cause
Fuse 1, 2 or 3 blown
ABS fuse blown
Wheel speeds of front and rear
wheels differ greatly
Malfunction in ABS
Engine vent hose bent
Engine oil level too high
Engine oil too thin (low viscos-
ity)
Fuse 6 is blown
Fuse 5 is blown
Fuse 1 blown
Ignition was not switched off
when vehicle was parked
The 12-V battery is not being
charged by the alternator
TROUBLESHOOTING 22
Action
–
Change the fuses of individual electri-
cal power consumers. (
–
Change the ABS fuses. (
–
Stop, switch off the ignition, start
again.
–
Read out the ABS fault memory using
the KTM diagnostics tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
–
Change the engine oil and the oil filter,
clean the oil screens. (
–
Change the fuses of individual electri-
cal power consumers. (
–
Change the fuses of individual electri-
cal power consumers. (
–
Change the fuses of individual electri-
cal power consumers. (
–
Charge the 12-V battery.
–
Check the charging voltage.
p. 321)
p. 319)
p. 339)
p. 340)
p. 321)
p. 321)
p. 321)
( p. 313)
357