KTM 890 Adventure R US 2021 Owner's Manual page 148

8 ERGONOMICS
146
–
Remove screws
tion the handlebar so that screws
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
–
Move the handlebar supports into the desired position
C
or . Mount and tighten screws
Guideline
Mount the left and right handlebar supports in the same
position.
Screw, handle-
bar support
–
Position the handlebar.
Info
F01907-10
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamp. Mount screws
evenly.
1
. Take off the handlebar clamps
3
are accessible.
3
. Take off handlebar supports
3
.
M10 45 Nm (33.2 lbf ft)
1
2
. Posi-
4
.
B A
,
Loctite ® 243™
and tighten