16 ELECTRICAL SYSTEM
324
–
Remove the screw on the front of the turn signal glass.
–
Carefully remove turn signal glass
–
2
Press bulb
wise by about 30°, and take it out of the socket.
–
Push the new bulb gently into the socket and turn it clockwise
all the way in.
Turn signal (RY10W / socket BAU15s) (
–
Check that the turn signal is functioning properly.
F01340-10
–
Position the turn signal glass.
Info
Insert holding lug
–
Insert the screw and first turn counterclockwise until it
engages in the thread with a small jerk. Tighten the screw
lightly.
1
.
carefully into the socket, turn it counterclock-
A
B
into cut-out
p. 370)
.