Room Sensor Influence; Setting The Room Sensor Influence - IVT 495 TWIN Manual To Installation, Commissioning And Maintenance

Hide thumbs

Table Of Contents

Table of Contents

Setting the room sensor influence

(This requires a room sensor, which is an

accessory.)

A room sensor allows you to influence the heat

curve. For each degree of deviation from the

required room temperature, the heat curve is

corrected with the set influence.

Example: If the room is one degree too warm and

the set value is 5, the flow temperature is reduced

by 5ºC.

1. Press the right button once and the text Set the

house heating here appears on the display.

2. Press the right button once again and the text

Heat more/less range 0-10 appears on the

display.

3. Turn the dial until Setting room temp

influence appears on the display.

4. Press the right button once and the text Set

value: appears on the display.

5. Press the right button (Adjust), the display

now shows the previously set value. Turn the

dial until the required value has been set.

6. Press the right button when the required value

has been set (Save). The value is now saved.

Press the left button to return to the main

menu.