Onchip Ide Function - Intel P35Express Chipset User Manual

Hide thumbs

Table Of Contents

Table of Contents

Onboard IDE Function

Please refer to section 3-7-1

Onboard Device Function

Please refer to section 3-7-2

Onboard Super IO Function

Please refer to section 3-7-3

Init Display First

This item allows you to decide to activate whether PCI Slot or AGP VGA first. The settings

are: PCI Slot, AGP Slot.

3-7-1

Onboard IDE Function

Onchip Primary

Onchip Secondary PCI IDE

IDE Primary Master

IDE Primary Slave

IDE Secondary Master

IDE Secondary Slave

IDE Primary Master

IDE Primary Slave

IDE Secondary Master

IDE Secondary Slave

IDE DMA Transfer Access

IDE HDD Block Mode

Delay for HDD (Secs)

﹡﹡﹡ Onchip Serial ATA Setting﹡﹡﹡

Onchip Serial ATA

﹡PATA IDE Mode

SATA Port

﹡SATA Port Speed Setting is

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values

IDE Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-2) for each of

the four IDE devices that the onboard IDE interface supports. Modes 0 through 2 provide

successively increased performance. In Auto mode, the system automatically determines the

best mode for each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode

IDE Primary/Secondary Master/Slave UDMA

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the

operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus

master driver). If your hard drive and your system software both support Ultra DMA/33 and

Ultra DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sector read/write.

If your IDE hard drive supports block mode (most new drives do), select Enabled for

Phoenix – AwardBIOS CMOS Setup Utility