Intel socket 478 processor based mainboard user's manual (96 pages)
Summary of Contents for Intel P35
Page 1
P3 Series Intel P35/P31 Socket LGA775 Processor Mainboard User’s Manual Rev: 1.00, Nov 2007 P/N: 88ENEP3S00...
Page 2
Disclaimer The intellectual property of this manual belongs to our company. The ownership of all of the products, including accessories and software etc. belong to our company. No one is permitted to copy, change, or translate without our written permission. We compiled this manual based on our careful attitude, but we can not guarantee the accuracy of the contents.
Chapter 1 Introduction 1.1 Package Checklist Thank you for choosing our product. Please check the following packing and accessories, if there is any broken or part missing, Please contact with your franchiser. • Mainboard x 1 • HDD Cable X 1 •...
P3 Series User's Manual 1.4 Connecting Rear Panel I/O Devices The rear I/O part of this mainboard provides the following I/O ports: I/O Panel --1 (For IP35-PRO) Debug LED I/O Panel --2 (For IP35-S) Debug LED (Optional) I/O Panel --2 (For IP31-CF) (Optional) Debug LED - 10 -...
Page 12
P3 Series User's Manual 1.4 Connecting Rear Panel I/O Devices • PS/2 Mouse: Connect to PS/2 mouse. • PS/2 Keyboard: Connect to PS/2 keyboard. • COM: Connect to external model, mouse or other devices that support this communication protocol. • Debug LED: Display error code. (please reference appendix 1) •...
P3 Series User's Manual Chapter 2 Hardware Setup 2.1 Choosing a Computer Chassis The mainboard and its component layouts illustrated in this chapter were based mainly on model “IP35-PRO”, unless specifi cally stated. • Choose a chassis big enough to install this mainboard. •...
P3 Series User's Manual 2.3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the mainboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly.
P3 Series User's Manual 2.3.2 Installation of the CPU Cooler For proper installation, please kindly refer to the instruction manuals of your CPU Cooler. 2.4 Installation of Memory Modules This mainboard provides four 240-pin DDRII (Double Data Rate) DIMM slots, and supports Dual Channel Memory Technology.
P3 Series User's Manual 2.5 Connecting Peripheral Devices 2.5.1 Floppy and IDE Disk Drive Connectors Each of the IDE port connects up to two IDE drives at Ultra ATA/100 mode by one 40-pin, 80-conductor,and 3-connector Ultra ATA/66 ribbon cables. Connect the single end (blue connector) at the longer length of ribbon cable to the IDE port of this board, the other two ends (gray and black connector) at the...
P3 Series User's Manual Chapter 3 Jumpers & Headers Setup 3.1 Checking Jumper Settings • For a 2-pin jumper, plug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position.
P3 Series User's Manual 3.4 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. CFAN or CFAN1: CPU Fan Power Connector SYSFAN1: System Fan Power Connector SYSFAN2: System Fan Power Connector (Optional) These fan connectors are not jumpers. DO NOT place jumper caps on these connectors.
P3 Series User's Manual 3.6 Additional USB Port Headers Pin Assignment Pin Assignment F U S B2/4/3/1 USR_BIOS BAK_BIOS 3.7 Front Panel Audio Connection Header This header provides the connection to audio connector at front panel. F AUDIO HD Audio: Pin No.
P3 Series User's Manual 3.8 Internal Audio Connectors Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. Definition CD-L CD-R USR_BIOS BAK_BIOS 3.9 ATX Power Input Connectors This mainboard provides two power connectors to connect power supplier. ATX 8Pin ATX 4Pin(Optional for JW-IP31-CF) USR_BIOS...
P3 Series User's Manual Chapter 4 BIOS Setup Utility BIOS stands for Basic Input and Output System. It was once called ROM BIOS when it was stored in a Read-Only Memory (ROM) chip. Now manufacturers would like to store BIOS in EEPROM which means Electrically Erasable Programmable Memory.
P3 Series User's Manual 4.5 BIOS Setup — CMOS Setup Utility • In order to increase system stability and performance, our engineering staff is constantly improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen.
P3 Series User's Manual • PC Health Status This setup page is the System auto detect temperature, voltage, fan, speed. • Frequency/Voltage Control This setup page is control CPU clock and frequency ratio. • Load Fail-Safe Defaults Fail-Safe Defaults indicates the value of the system parameters which the system would be in safe configuration.
P3 Series User's Manual 4.5.3 Standard CMOS Features Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Mon, 11 2007 Item Help Time (hh:mm:ss) 13 : 19 : 44 Menu Level ► ► SATA Channel 1 [None] ► SATA Channel 3 [None] Press [Enter] to enter ►...
Page 25
P3 Series User's Manual IDE HDD Auto-Detection This item allows you to detect the parameters of IDE drives by pressing <Enter> key. The parameters will be shown on the screen automatically. IDE Channel 0 Master/Slave,SATA Channel 1~4 When set to [Auto], the BIOS will automatically check what kind of IDE or SATA hard drive you are using.
P3 Series User's Manual 4.5.4 Advanced BIOS Features Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features ► Hard Disk Boot Priority [Press Enter] Press Enter Item Help Virus Warning [Disabled] CPU L3 Cache [Enabled] Menu Level ► Quick Power On Self Test [Enabled] Select Hard Disk Boot First Boot Device...
Page 27
P3 Series User's Manual ・ First Boot Device/Second Boot Device/Third Boot Device/Boot Other Device Select the drive to boot first, second and third in the [First Boot Device], [Second Boot Device], and [Third Boot Device] items respectively. The BIOS will boot the operating system according to the sequence of the drive selected.
P3 Series User's Manual 4.5.6 Integrated Peripherals Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals ► OnChip IDE Device [Press Enter] Press Enter Item Help ► Onboard Device [Press Enter] ► SuperIO Device [Press Enter] Menu Level ► ► USB Device Setting [Press Enter] →←...
Page 30
P3 Series User's Manual IDE Primary Master/Slave UDMA (Auto) Each IDE channel supports a master device and a slave device. This mainboard supports UltraDMA technology, which provides faster access to IDE devices. If you install a device that supports UltraDMA, change the appropriate item on this list to Auto. You may have to install the UltraDMA driver supplied with this mainboard in order to use an UltraDMA device.
Page 31
P3 Series User's Manual Onboard PCIE Lan Controller This option enables or disables the LAN controller. BIOS Write Protect This option enables or disables the BIOS Write Protect function. Azalia Audio Select This options allows you choose Azalia audio or AC97 audio. •...
Page 32
P3 Series User's Manual Onboard Parallel Port This item specifies the I/O address used by the parallel port. [Disabled]: This option prevents the parallel port from accessing any system resources. When the value of this option is set to [Disabled], the printer port becomes unavailable.
P3 Series User's Manual 4.5.7 Power Management Setup Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup ► PCI Express PM Function Item Help Press Enter ACPI Function [Enabled] ACPI Suspend Type [S3(STR)] Menu Level ► Run VGABIOS if S3 Resume [Auto] Power Management [User Define]...
Page 34
P3 Series User's Manual ・ Video off Method This selection will cause the system to turn off the vertical and V/HSYNC+Blank horizontal synchronization ports and write blanks to the video buffer. Blank Screen This option only writes blanks to the video buffer. DPMS Support Initial display power management signaling.( default) ・...
P3 Series User's Manual 4.5.9 PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status *** FAN Control Setting *** Item Help FAN Mode Setting [Full On mode x Slop PWM 1 0.500 PWM Menu Level ► x Temperature Limit of OFF x Temperature Limit of Start x Temperature Limit of Full x Fan Start PWM...
P3 Series User's Manual 4.5.10 Frequency/Voltage Control Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control Press Enter ► CPU Feature [Press Enter] Item Help ► DRAM Voltage Regulator [Press Enter] Cureent CPU Voltage 1.31V Menu Level ► Ajust DRAM Voltage [Default] Cureent DIMM Voltage 1.82V...
P3 Series User's Manual 4.5.11 Load Fail-Safe Defaults This option opens a dialog box that lets you install fail-safe defaults for all appropriate items in the Setup Utility: Press <Y> and the <Enter> to install the defaults. Press <N> and then <Enter>...
P3 Series User's Manual To disable password, just press <Enter> when you are prompted to enter password. A message will confirm the password being disabled. Once the password is disabled, the system will boot and you can enter BIOS Setup freely. !...
P3 Series User's Manual Chapter 5 Driver Installation Check your package and there is Driver CD included. This CD consists of all dirvers you need. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which drivers needed so that your system can function properly.
Page 41
P3 Series User's Manual When you choose Mainboard Driver installation Utility, the drivers menu should appear as below: Back <- INTEL Chipset Installtion Utility Back <- INTEL Chipset Installation Utility Onboard LAN Driver Realtek LAN Driver Onboard Audio Driver Realtek Audio Driver...
P3 Series User's Manual APPENDIX 1 POST Codes NOTE: EISA POST codes are typically output to port address 300h. ISA POST codes are output to port address 80h. Code (hex) Name Description Turn Off Chipset Cache OEM Specific-Cache control Processor Test 1 Processor Status (1FLAGS) Verification.
Page 43
P3 Series User's Manual Early Cache Initialization Cyrix CPU initialization. Cache initialization. Setup Interrupt Vector Initialize first 120 interrup tvectors with SPURIOUS_INT_HDLR Table and initialize INT 00h-1Fh according to INT_TBL. Test CMOS RAM Test CMOS RAM Checksum, if bad, or insert key pressed, Checksum load defaults.
Page 44
P3 Series User's Manual 21-2F Enable Slots 1-15 Initialize slots 1 through 15. Size Base and Extended Size base memory from 256K to 640K and extended memory Memory above 1MB. Test Base and Extended Test base memory from 256K to 640K and extended memory Memory above 1MB using various patterns.
Page 45
P3 Series User's Manual Manufacturing POST Reboot if Manufacturing POST Loop pin is set. Otherwise Loop or Display display any messages (i.e., any non-fatal errors that were Messages detected during POST) and enter Setup. Security Check Ask password security (optional). Write CMOS Write all CMOS values back to RAM and clear screen.