Table of Contents
Advertisement
3-7
Integrated Peripherals
> Onboard SATA Function
> Onboard Device Function
> Onboard Super IO Function
PWR status after PWR Failure
Init Display First
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Onboard SATA Function
Please refer to section 3-7-1
Onboard Device Function
Please refer to section 3-7-2
Onboard Super IO Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or AGP VGA first. The settings
are: PCI Slot, AGP Slot.
3-7-1
Onboard SATA Function
SATA Controller 1
SATA Controller 2
SATA Channel 0 Master
SATA Channel 1 Master
SATA Channel 2 Master
SATA Channel 3 Master
SATA Channel Mode Support
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
SATA Controller 1/2
This setting allows you to enable/disable the onboard SATA controller. Selecting [Enabled]
enables the system to support SATA spec. setting options:[Disabled],[Enabled].
SATA Controller 0/1/2/3/4 Master
This setting allows you to enable/disable the onboard SATA channel.
The settings are: Enabled, Disabled.
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
Press Enter
Press Enter
Press Enter
Always Off
PCI Slot
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Onboard SATA Function
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
Menu Level >>
F7:Standard Defaults
37
Item Help
Item Help
Advertisement
Table of Contents
