2-4
Install Memory
This motherboard provides four 240-pin DDR2 DUAL INLINE MEMORY MODULES
(DIMM) socket for DDR2 memory expansion available from minimum memory volume of
128MB to maximum memory volume of 8.0GB DDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1)
Bank 2, 3 (DIMM2)
Bank 4, 5 (DIMM3)
Bank 6,7 (DIMM4)
Total
Recommend DIMM Module Combination
1.
One DIMM Module ----Plug in DIMM1
2.
Two DIMM Modules---Plug in DIMM1 & DIMM3 or DIMM2 & DIMM4 for Dual
channel function
3.
Four DIMM Modules---Plug in DIMM1/DIMM2/DIMM3/DIMM4.
For Dual channel Limited!
4.
Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &
DIMM3 or DIMM2 &DIMM4, or four DIMM Modules plug in DIMM1~DIMM4.
5.
DIMM1 & DIMM3 or DIMM2 & DIMM4 must be the same type, same size, same frequency
for dual channel function.
Install DDR SDRAM modules to your motherboard is not difficult, you can refer to figure
below to see how to install a 240-Pin DDR2 667/DDR2 800 SDRAM module.
240-Pin DIMM
DDR2 667 /DDR2 800
DDR2 667 /DDR2 800
DDR2 667 /DDR2 800
DDR2 667 /DDR2 800
System Memory (Max. 8.0GB)
19
PCS
Total Memory
X1
128MB∼2.0GB
X1
128MB∼2.0GB
X1
128MB∼2.0GB
X1
128MB∼2.0GB
4
128MB∼8.0GB
DIMM1,3
DIMM2,4