1. Manuals
  2. Brands
  3. Intel Manuals
  4. Motherboard
  5. PT-6IBT
  6. User manual

Intel PT-6IBT User Manual

Pentium ii at mainboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

PT-6IBT
PT-6IZT
PENTIUM II
AT MAINBOARD
USER'S MANUAL
( VER 3.X )
.................................................................
PRINTED IN TAIWAN
DOC NUMBER UM-IBT-E3

Advertisement

Table of Contents
loading

Related Manuals for Intel PT-6IBT

Summary of Contents for Intel PT-6IBT

  • Page 1 PT-6IBT PT-6IZT PENTIUM II AT MAINBOARD USER’S MANUAL ( VER 3.X ) ..............PRINTED IN TAIWAN DOC NUMBER UM-IBT-E3...
  • Page 2 440BX/ZX PENTIUM II MAINBOARD ( VER 3.X ) USER’S MANUAL ..............PRINTED IN TAIWAN DOC NUMBER UM-IBT-O3...

  • Page 3: Table Of Contents

    440BX/ZX AT TABLE OF CONTENTS MAINBOARD TABLE OF CONTENTS Chapter & Section Page 1. INTRODUCTION ................1-1 OVERVIEW ................... 1-1 MAINBOARD LAYOUT ..............1-2 SPECIFICATION .................. 1-3 2. INSTALLATION ................2-1 UNPACKING ..................2-1 AMAZING WAYS TO POWER ON THE PC SYSTEM....2-2 POWER OFF THE PC SYSTEM............
  • Page 4 440BX/ZX AT MAINBOARD SOMETHING IMPORTANT ! ¶ TRADEMARKS All trademarks used in this manual are the property of their respective owners. ¶ LOAD SETUP DEFAULTS “LOAD SETUP DEFAULTS” is the function which will have the BIOS default settings loaded into the CMOS memory, these default settings are the best-case values that should optimize system performance and increase system stability .This function will be necessitated when you receive this mainboard, or when the system CMOS data is corrupted.

  • Page 5: Introduction

    Intel® 82440BX or 82440ZX AGPset™ system chipset. The system core logic on this mainboard will be either the Intel 440BX or 440ZX chipset The difference between BX and ZX on this mainboard is shown as following:...

  • Page 6: Mainboard Layout

    440BX/ZX AT INTRODUCTION MAINBOARD MAINBOARD LAYOUT CN 2 CN 5 JP 10 USB2 USB1 CN 15 ATX POWER AT POWER CN 14 CN 13 CPU FAN SB-LINK JP 14 CN 8 JP 11 JP 6 DIMM 3 BAT 1 DIMM 2 JP 7 JP 8 DIMM 1...

  • Page 7: Specification

    SPECIFICATION ¥ CPU Intel Pentium™ II processor and Celeron™ processor. 1. When the FSB clock is 66 MHz, it supports 233 MHz up to 366 MHz CPUs. 2. When the FSB clock is 100 MHz, it supports 350 MHz up to 500 MHz CPUs.
  • Page 8 440BX/ZX AT INTRODUCTION MAINBOARD ISA Slots 16-bit x 2 (One of the slot is PCI/ISA shared) ¥ WOL PORTS One WOL connector supports Wake-On-LAN (WOL up-designed) ¥ SB-LINK PORTS One SB-LINK feature connector to support PCI sound cards. (such as Creative™ Labs EMU8008 sound chip) ¥...
  • Page 9 440BX/ZX AT INTRODUCTION MAINBOARD This mainboard also provides the hardware monitoring program so that you can monitor the healthy status of your PC system. When you find there is the Winbond W83783S (U2) is installed on the board, you can run the hardware monitoring program and then it will inform you the system status all the time.

  • Page 10: Installation

    440BX/ZX AT INSTALLATION MAINBOARD 2. INSTALLATION UNPACKING The mainboard contains the following components in the package. Please inspect the following contents and confirm that everything is there in the package. If anything is missing or damaged, call your supplier for instructions before proceeding. l This mainboard.

  • Page 11: Amazing Ways To Power On The Pc System

    440BX/ZX AT INSTALLATION MAINBOARD 2.2 AMAZING WAYS TO POWER ON THE PC SYSTEM Basically, you can connect either AT or ATX power supply to this mainboard. When the ATX power supply is connected, there are many ways to power on the system. Please read the following description for the details.
  • Page 12 440BX/ZX AT INSTALLATION MAINBOARD ¨ PS/2™ MOUSE KEY CLICK (optional) When you have a PS/2™ mouse connected to the system, you may change the setup in the BIOS and use the mouse click to turn on the PC system power. Please refer to section 4-7 for the BIOS setting.
  • Page 13 440BX/ZX AT INSTALLATION MAINBOARD ¨ MODEM RING-IN This mainboard can be triggered by a modem ring-in signal. When you have a external modem installed, you can use it to power on the PC system. When there is the incoming message from te external modem, the PC system will be triggered by the ring-in signal and wake up automatically to receive the message for you.

  • Page 14: Power Off The Pc System

    440BX/ZX AT INSTALLATION MAINBOARD Note: This function will be disabled if you turn off the power before the system can verify the DMI pool data. 2.3 POWER OFF THE PC SYSTEM 1. When ATX power supply is connected. There are two ways to power off the system. They are “Shut Down by Power Button”...

  • Page 15: Hardware Setup

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 3. HARDWARE SETUP Before you can start to install this mainboard, some hardware settings is required to make sure it will work perfectly with the component which you are going to install in your PC system. To configure this mainboard is a simple task, only a few jumpers, connectors, cables and sockets need to be selected and configured.

  • Page 16: Connectors

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD In order to increase of the system performance and steability, two suggestions are recommended when you are installing the DIMM modules : 1. Always use PC100 DIMM modules which support the SPD function. 2. Always install DIMM module starting from DIMM 1 first, and then DIMM2 and DIMM3 CONNECTORS The connectors on mainboard will be used to connect the accessories or peripheral...
  • Page 17 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (A) CN1: Keyboard Connectors Either the PS/2 (CN20) type or the AT (CN1) type keyboard connector can be installed here, ( only one connector can be installed) The factory default is the AT type connector installed on the board. When the AT type K/B installed on the board, the PS/2 type (CN20) become invisible.
  • Page 18 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (B) CN2: PS/2 Mouse Connector Mouse Data No Connection CN 2 Ground +5V DC Mouse Clock DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 (C) CN3: COM 1 (Serial Port 1) Connector CN4: COM 2 (Serial Port 2) Connector CN 4 CN 3...
  • Page 19 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (D) CN5: Parallel Port Connector CN 5 Parallel Port DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 Pin assignment of parallel port: 1 14 Pin # Signal name Pin # Signal name STROBE AUTO FEED Data Bit 0...
  • Page 20 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (E) CN6: USB 1 (Universal Serial Bus) Connector (F) CN7: USB 2 (Universal Serial Bus) Connector CN 7 CN 6 USB 2 USB 1 DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 Pin assignment of USB connector: CN 7...
  • Page 21 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (H) CN9: IDE 1 Connectors, (Primary IDE Port: 1F0H, IRQ 14) (I) CN10: IDE 2 Connectors, (Secondary IDE Port: 170H, IRQ 15) DIMM 3 DIMM 2 BAT 1 DIMM 1 CN10: IDE 2 CN9: IDE 1 (J) CN11: SB-LINK Connector (For PCI bus sound cards.
  • Page 22 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (K) CN12: IR / FIR (Infrared Rays) Connector Consumer IR Connector ( Consumer IR connector is active only when W83977CTF-AW I/O Chip is installed on position U10 ) IR/FIR (INFRARED RAYS) CONSUMER IR ( +5VDC ) ( +5VDC ) ( NO CONNECTION ) ( IR TRANSMIT )
  • Page 23 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (M) CN14: AT Power Connector: CN 14 AT Power Connector DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 Pin # Assignment Power Good ( Orange ) +5V DC ( Red ) +12V DC ( Yellow ) -12V DC...
  • Page 24 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (N) CN15: ATX Power Connector: CN15 ATX Power Connector DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 Pin assignment of ATX power connector 11 1 Pin # Signal name Pin # Signal name + 3.3V DC + 3.3V DC - 12V DC...
  • Page 25 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (O) CN16: WOL (Wake On LAN) Connector CN 16 DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 Pin assignment of WOL Connector Pin # Signal name Pin # Signal name Pin # Signal name 5V standby Ground...

  • Page 26: Hl Ide Hdd Led Connector

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD (Q) Push buttons and LED connectors A series of connectors are designed on the board to connect the push buttons and LED indicators. Followings are the details: DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 Reset Button connector...
  • Page 27 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Power On / Off and External Suspend Switch Connector 5-a. When this mainboard has the ATX power supply connected, According to the setup in CMOS, the PW connector has two functions. It can be the Power Switch or Suspend Switch of your PC system.(please refer to Section- 4-7 and section 4-8 for BIOS setup) If the setup in CMOS is “Delay 4 Sec.”, the switch function will be:...
  • Page 28 440BX/ZX AT AWARD BIOS SETUP MAINBOARD 5-b. When this mainboard has the AT power supply connected, According to the setup in CMOS, the PW connector has two functions. It can be the Reset button or Suspend Switch of your PC system.(please refer to Section 2-2 and section 4-7 for BIOS setup) A.
  • Page 29 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (R) Speaker, LED and Key Lock Connector: DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 1 2 3 4 5 1 2 3 4 5 PWR-LED KBLOCK Speaker, LED and Key Lock Connector SPK: Speaker connector Pin # Signal name + 5V DC...

  • Page 30: Jumpers

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 3.3 JUMPERS This section will discuss the jumper setting on this mainboard. In order to let you have better idea of the jumper setting, please see below for the explanation of jumper settings before you start this section. open short A jumper is a set of two, three or more jumper pins which allows users to make...
  • Page 31 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (B) JP2: OnNow Function Selection (optional) When JP2 is installed on the board, it will support the OnNow function. The OnNow function will allow you to use Keyboard and PS/2 mouse key click to power on the PC system.
  • Page 32 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (D) JP6: CMOS Data Clear Button DIMM 3 DIMM 2 BAT 1 DIMM 1 IDE 2 IDE 1 JP 6 Normal Setting Clear CMOS Note: Improper BIOS setting may cause PC system hang-up, In case that it happened, use JP4 to clear the CMOS information and get the PC system back to normal.
  • Page 33 The clock ratio is fixed for Celeron™ processor, it means that we can not select different clock ratio to what is defined by Intel. So we will be unable to select other clock ratio for the Celeron™ processor. In other word, the clock ratio switch setting mentioned earlier in this chapter will make no change to the clock ratio.
  • Page 34 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Different Pentium™ II or Pentium™ III processors will use different FSB clock. When you have installed the processor onto this mainboard, the system BIOS will detect the type of the processor and decide the proper FSB clock automatically. (Same as above, you can select other FSB clock in the BIOS setup program) For detail information of your Pentium™...
  • Page 35 440BX/ZX AT AWARD BIOS SETUP MAINBOARD (F) JP14: CPU Voltage Range Selection (Optional) JP14 is a special design on the mainboard which allows you to select the CPU voltage range (Vcore) for the Pentium II/III processors. The voltage regulator on the mainboard will generate 1.3V ~ 3.5V DC to support different processors.
  • Page 36 440BX/ZX AT AWARD BIOS SETUP MAINBOARD JP100: FSB Clock Selection JP100 is designed on the board for some special purpose. You can use the setting on JP100 to force the FSB clock at 66/100MHz despite of the CPU type. BAT 1 1-2: Auto detect FSB clock JP100 2-3: 66MHz FSB clock )

  • Page 37: Installation Of Device Drivers

    98. This driver is designed for Windows 95 and Windows NT only) Step 1. Insert the CD into the CD ROM drive. Step 2. Change the directory to "\Driver\mainboard\Intel\IDE Driver " Step 3. See "README.TXT" and choose the OS to install the device driver.

  • Page 38: Award Bios Setup

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 4. AWARD BIOS SETUP 4.1 GETTING STARTED When the system is first time powered on or reset by user, the BIOS will enter the Power On Self Test routines ( POST, which will display a copyright message on the screen and execute a diagnostics and initialization procedure.) In case that there is any error or malfunction detected, the BIOS will give a series of beep sound or display the error message on screen.

  • Page 39: Main Menu

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD To execute the Award® BIOS CMOS Setup program, please press the DEL key. The STANDARD CMOS SETUP screen as shown in figure Fig. 5-2 will be triggered: 4.2 MAIN MENU ROM PCI / ISA BIOS (2A69JXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC.

  • Page 40: Standard Cmos Setup

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD The following pages show all the screens which you will find in the CMOS SETUP program, each picture will contain the selection items and its default settings. At the bottom of some screen, you will find the description of all function key which can be used to change the settings.

  • Page 41: Bios Features Setup

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD Floppy 3 Mode Support: (Default setting: disabled ) This mode is for the Japanese 3.5 inch floppy disk drive. If you have such drive installed in your PC system, please select enable, otherwise, use the default setting. 4.5 BIOS FEATURES SETUP ROM PCI / ISA BIOS (2A69JXXX) BIOS FEATURES SETUP...
  • Page 42 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Disabled : No warning message will appear on the screen when anything attempts to access the boot sector or hard disk partition table. CPU Internal / External Cache : ( default setting: Enabled ) These fields allow you to turn on or turn off the Level 1 and Level 2 cache that built inside the Pentium™...

  • Page 43: Chipset Features Setup

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD When you are using the “OS/2™” operating system and the system memory is more than 64MB, you will have to select the setting to “OS2”, otherwise, leave this on the default setting “Non-OS2” for all other operating systems. PS/2 mouse function control : ( default setting: Enabled ) This mainboard built-in a PS/2™...
  • Page 44 440BX/ZX AT AWARD BIOS SETUP MAINBOARD CPU Host Clock (CPU/PCI): ( default setting : “Default” ) This field allows you to select different clock speed for your CPU and PCI bus. The default setting will leave the mainboard to detect the CPU type and assign the proper frequency automatically..
  • Page 45 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Enabled Video BIOS access cached Disabled Video BIOS access not cached Video RAM Cacheable: ( default setting : “Disabled” ) Select Enabled allows caching of the video RAM , resulting in better system performance. However, if any program writes to this memory area, a system error may result.
  • Page 46 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Delayed Transaction : (default setting : “Disabled” ) The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select Enabled to support compliance with PCI specification version 2.1. The Choice: Enabled, Disabled. AGP Aperture Size (MB): (default setting : “64”...

  • Page 47: Power Management Setup

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD There is a CD comes with the mainboard. You will find the hardware doctor program in the CD. When the program is installed, it will let you have a bodyguard in your PC system. It will keep monitoring the CPU temperature, Cooling fan speed, system voltage …...
  • Page 48 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Power Management : (Default setting: “User Define”) This category allows you to select the type (or degree) of power saving and is directly related to the following modes: 1. Doze Mode 2. Standby Mode 3.
  • Page 49 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Video Off Method: (Default setting: Blank screen ) This determines the manner in which the monitor is blanked. V/H SYNC+Blank This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer.
  • Page 50 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Standby Mode: ( Default setting: “Disable “) When enabled and after the set time of system inactivity, the fixed disk drive and the video would be shut off while all other devices still operate at full speed Suspend Mode: ( Default setting: “Disable “) When enabled and after the set time of system inactivity, all devices except the CPU will be shut off.

  • Page 51: Parallel Port

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD Resume by Alarm : ( Default setting : “Disabled” ) When “Enabled”, the following two selection fields - “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” will appear on the screen. You can use these two fields to set the date and time which you want to resume the system from Sleep or Suspend mode.

  • Page 52: Integrated Peripherals

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD INTEGRATED PERIPHERALS ROM PCI / ISA BIOS (2A69JXXX) INTEGRATED PERIPHERALS AWARD SOFTWARE, INC. IDE HDD Block Mode Enabled KBC input clock : 8 MHz IDE Primary Master PIO : Auto Onboard FDC Controller : Enabled IDE Primary Slave PIO : Auto Onboard Serial Port 1...
  • Page 53 440BX/ZX AT AWARD BIOS SETUP MAINBOARD The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased performance. In Auto mode, the system automatically determines the best mode for each device.
  • Page 54 440BX/ZX AT AWARD BIOS SETUP MAINBOARD This item allows you to determine which Infra Red (IR) function of onboard I/O chip. The Choice: Normal, ASKIR, HPSIR Onboard Parallel Port: ( Default setting : “378/IRQ7” ) Select a logical LPT port name and matching address for the physical parallel port. The choice: 378H/IRQ7, 278H/IRQ5, 3BCH/IRQ7, Disabled.

  • Page 55: Pnp/Pci Configuration

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD PNP/PCI CONFIGURATION ROM PCI / ISA BIOS (2A69JXXX) PNP/PCI CONFIGURATION AWARD SOFTWARE, INC. PNP OS Installed Assign IRQ For VGA : Enabled Resources Controlled By : Manual Assign IRQ For USB : Enabled Reset Configuration Data : Disabled Used MEM base addr : N/A...
  • Page 56 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Resources Controlled by : ( default setting: “Manual”) The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play-compatible devices. If you select Auto, all the interrupt request (IRQ) and DMA assignment fields disappear, as the BIOS automatically assigns them.
  • Page 57 440BX/ZX AT AWARD BIOS SETUP MAINBOARD Before you decide to proceed with the change, please make sure that your USB and VGA adapter will not use the IRQ signal. Otherwise, your PC system will become abnormal and the devices connected to these ports may not be working at all. It is very simple to tell the difference.

  • Page 58: Load Setup Defaults

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 4.10 LOAD SETUP DEFAULTS ROM PCI / ISA BIOS (2A69JXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 59: Supervisor Password / User Password

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 4.11 SUPERVISOR PASSWORD / USER PASSWORD ROM PCI / ISA BIOS (2A69JXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 60: Ide Hdd Auto Detection

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 4.12 IDE HDD AUTO DETECTION ROM PCI / ISA BIOS (2A69JXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 61: Save & Exit Setup

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 4.13 SAVE & EXIT SETUP ROM PCI / ISA BIOS (2A69JXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 62: Exit Without Saving

    440BX/ZX AT AWARD BIOS SETUP MAINBOARD 4.14 EXIT WITHOUT SAVING ROM PCI / ISA BIOS (2A69JXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

This manual is also suitable for:

Pt-6izt

Table of Contents