Envelope Orientation And Recommended Status - Ricoh IM C530 Series User Manual

7. Adding Paper and Toner
Envelope Orientation and Recommended
Status
The way to place an original on the exposure glass and load envelopes varies depending on the shape
and orientation of the envelopes.
• Do not print on the following envelopes:
• Window envelopes
• Envelopes with moisture
• Fan the envelopes before loading them to separate them and prevent the glue on them from
causing them to stick together. If fanning does not prevent them sticking together, load them one by
one. Note that some types of envelopes cannot be used with this machine.
Before setting envelopes
Before loading envelopes, press down on them to remove any air from inside and flatten out all
four edges. If they are bent or curled, flatten their leading edges (the edge going into the machine)
by running a pencil or ruler across them.
• For information about recommended envelopes, contact your local dealer.
• The Duplex function cannot be used with envelopes.
• Copied or printed sheets are delivered to the Standard Tray even if you specified a different tray.
• Set the margins on the top, bottom, left and right to be 15 mm or more so as to print with adequate
quality.
• An image may not be printed clearly on a sheet whose thickness is uneven. Print a few sheets and
check the result.
• The printing result may not be adequate or the envelope may become wrinkled when the
temperature or humidity is high.
• The printing result may not be adequate or output envelopes may become wrinkled depending on
the printing environment even when using the recommended envelopes.
170