Ricoh IM C530 Series User Manual page 220

8. Troubleshooting
Message
"CE: The job was
cancelled because of an
error with PCL5c/XL."
"CM: The job was
cancelled because of a
timeout error with PS3/
PDF."
"CN: The job was
cancelled because the
print settings specified by
PS3 are not consistent
with the machine
settings."
"CO: The job was
cancelled because of a
font error with PS3/
PDF."
218
Cause
An error occurred in PCL6c
printing, so printing was
canceled by the auto job
cancel function.
A timeout error occurred in
PostScript 3 or PDF printing,
so printing was canceled by
the auto job cancel function.
Some of [Printer Settings] on
the print data did not match
the machine settings, so
printing was canceled by
the auto job cancel function.
A font error occurred in
PostScript 3 or PDF printing,
so printing was canceled by
the auto job cancel function.
Solution and reference
Check that the machine can communicate
properly with the PC.
• Check that the machine can
communicate properly with the PC.
• Check the setting of [Job Timeout] in
[Settings] [Printer Settings]
Menu]. When [Use Machine
Setting(s)] is selected, set the waiting
time longer. When [Use Driver/
Command] is selected, set the waiting
time specified by the command
longer.
Check that the printer settings specified in
the print data match the settings in
[Settings] [Printer Settings]
Menu].
Register the required fonts.
[PS
[PS