Ricoh IM C530 Series User Manual page 214

8. Troubleshooting
Message
"Exceeded the
maximum unit count
for Print Volume Use.
The job has been
cancelled."
"File system is full."
"Hardware Problem:
USB"
"Hardware Problem:
Ethernet"
"Hardware Problem:
Wireless Card"
"I/O buffer
overflow."
212
Cause
When the print For details about the print volume use limitation, consult
volume is limited, the user administrator. The user administrator can clear
printing was the counter or change the limit on the print volume.
canceled because
See "Checking the Counter of the Machine for Each
the print volume of
Color Category", User Guide (Full Version).
a user exceeded the
See "Specifying Maximum Print Volume Use of Each
upper limit allotted
User", User Guide (Full Version).
for the user.
The file system is Erase documents that are no longer needed.
full, and the PDF file
See "Deleting a Locked Print File Stored in the
cannot be printed.
Machine", User Guide (Full Version).
An error has Turn off the power of the machine, wait for 10 seconds
occurred on the or more after confirming that the main power indicator
USB interface. is turned off, and then turn on the power.
page 9 "Turning On and Off the Power"
An error has
If the message persists even after you have turned the
occurred in the
power off and then on, consider repairing the machine.
Ethernet interface.
An error has Turn off the power of the machine, check that the
occurred in the Wireless LAN board is correctly installed in the
Wireless LAN machine, and then turn on the power.
board.
page 9 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
An overflow has • Reduce the transmission data.
occurred in the
Increase the value in [I/O Buffer] on [Settings]
receive buffer.
[Printer Settings]
Solution and reference
[Host Interface].