Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - Husqvarna FE 350 2021 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.38
12.39
12.40
84

Checking the frame

F00255-01

Checking the link fork

401520-01

Checking the throttle cable routing

S03564-10
–
Check the frame for damage, cracking, and deformation.
» If the frame shows signs of damage, cracking, or defor-
mation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
–
Check the link fork for damage, cracking, and deformation.
» If the link fork exhibits damage, cracking, or deformation:
–
Change the link fork.
Info
Always replace a damaged link fork. Repair of
the link fork is not authorized by Husqvarna
Motorcycles.
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 66)
–
Remove the right side cover. (
–
Remove the fuel tank.
Main work
(FE EU)
–
Check the throttle cable routing.
Both throttle cables must be routed, side by side, on
the back of the handlebars and above the fuel tank
bracket, to the throttle valve body. Both throttle cables
must be secured behind the rubber strap of the fuel
tank support.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
p. 68)
p. 70)
( p. 75)