Mounting The Seat - Husqvarna FE 350 2021 Owner's Manual

12.19

Mounting the seat

SERVICE WORK ON THE CHASSIS 12
Main work
–
Remove screw
–
Pull seat back and lift it off.
S03559-10
Main work
–
Mount the front of the seat on the collar bushing of the fuel
tank and the rear in the bracket.
–
Push the seat forward.
–
Make sure the seat is correctly latched in place.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
S03559-11
Finishing work
–
Install the air filter box cover. (
1
with the bushing.
1
with the bushing.
M6 10 Nm (7.4 lbf ft)
p. 68)
67