HTC VIVE Pro 2 User Manual page 54

54 Base stations
Installing Base Station 1.0
Before installing the base stations, decide first whether you want to set up a room-scale or
seated/standing-only play area. See
During unboxing, remove the thin film that covers the front panel of the base stations.
1. Mount the base stations diagonally at opposite corners of your space.
For details on how to use the mounting kit, see
Station 1.0 on page 56.
You can also use tripods, light stands, or cargo poles when mounting the base stations, or
even place it on stable book cases. Just avoid using unstable mounting solutions or
surfaces that are prone to vibration.
2. Adjust the base stations so that the front panels are facing toward the center of the play
area.
3. Attach the power cables to the base stations, and then plug them each into a power outlet
to turn them on. The status lights should be green.
4. Connect the base stations and set the channels.
For details on how to get the sync cable, contact customer care.
Without the sync
cable
With the sync cable
(optional for added
reliability)
Planning your play area
Using the mounting kit to install Base
Press the Channel buttons at the back of the base stations so
that one base station is set to channel "b", while the other is set
to channel "c".
Press the Channel buttons at the back of the base stations so
that one base station is set to channel "A", while the other is set
to channel "b".
on page 69.