HTC VIVE Pro 2 User Manual page 34

34 Headset and link box
How do I reassemble the headset after repair?
After receiving your repaired headset, properly attach the accessories before using your headset
again.
§ Reconnect the headset cable.
1. Press and hold the lens distance button on the headset, and then pull out the visor to
its farthest point. For an easier access to the connector slots, pull up the headset
strap.
2. Align and reinsert the headset cable connector (side with round mark up) to the port
with the corresponding round mark. You'll hear a click when the connector is fully
inserted.
3. Press and hold the lens distance button on the headset, and then push the visor back
to the starting point.
4. Make sure that the headset cable connector is secured and that the cable is set
before the edge of the compartment.
L