Table of Contents
Advertisement
3. The wireless security screen will appear
Figure 93: Wireless security screen
4. Enter the SSID name of the gateway's wireless network name in the "Wireless Network Name "text box. It
is important that you use the same wireless network name and passphrase on both the extender and
gateway to ensure seamless roaming between the two 2.4GHz wireless access points.
5. If applicable, click in the "5GHz" button next to "Wireless Operating Frequency" and enter the SSID name
of the gateway's wireless network name in the "Wireless Network Name" text box. You should add "-5G" to
the end of the SSID so the customer can differentiate this network from the 2.4GHz range network when
looking at a list of available networks on their wireless devices.
6. Click Apply to save changes.
3.4 Wireless STB Setup
Page 87 of 130
Advertisement
Table of Contents
