Table of Contents
Advertisement
Onboard Parallel port Mode: This field allows the user to select the parallel port mode.
The default value is ECP + EPP.
Normal:
Standard mode. IBM PC/AT Compatible bidirectional parallel port.
EPP:
Enhanced Parallel Port mode.
ECP:
Extended Capabilities Port mode.
EPP+ECP: ECP Mode & EPP Mode.
PWRON AFTER PWR-Fail: AC Power Recovery ON/OFF system control.
Off :
Always turn OFF system power when AC recovery
On :
Always turn ON system power when AC recovery
Former-Sts : Turn ON/OFF system depend on the last status of system if the system is on
before Power-Loss , then will auto power on after power recovery.
Game port Address: Default setting is 201.
The choice: 201,209, Disabled.
Midi Port Address: On board Audio chip Midi port address setting , Default setting is 330.
The choice: 330,300,290,Disabled.
Midi Port IR0: On board Midi Port IR0 setting , Default etting is 5
The choice: 5 , 7
3-5 POWER MANAGEMENT SETUP
The Power Management Setup allows you to configure you system to most effectively save
energy while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright © 1984 – 1998 Award Software
Power Management Setup
25
Advertisement
Table of Contents
