Driver Installation; Software Installation - JETWAY 911BF User Manual

Preparation
1. You must have more than 33MB memory on your system in order to install WINDOWS NT VGA
driver.
2. If you are using Windows 95, you must update to Windows 95 OSR2.1 or later version.
3. If you are using Windows NT, you must update to Server Pack 4 or later version.
4. We are assuming your CD-ROM is X drive.
5. If you don't have Modem/Riser card, you will find a PCI card with a "!" mark in "OTHER DEVICE
"under" Device Manager". You can solve this problem by disable "AC97 Modem" under "Integrated
Peripherals" option of the BIOS.
6. Multi language supported for both VGA and Sound drivers installation.

4-1 Software Installation

VGA Driver
Windows95/Windows98：Run X：\INTEL810\VGA\WIN9X\GRAPHICS\SETUP.EXE
Windows NT 4.0：Run X：\INTEL810\VGA\NT4\GRAPHICS\SETUP.EXE
Please follow on screen instruction to complete your installation.
82801/82802 INF DRIVER
Windows 95：
1. Install USB Supportment Driver From win95 CD Driver (OSR2.1 Support USB Need).
2. Install X：\INTEL810\INF\INFINST\SETUP.EXE and follow on screen instruction.
3. After re-start your computer; just simply click NEXT to choose Windows default driver.
Windows 98：
1. Install X：\INTEL810\INF\INFINST\SETUP.EXE and follow on screen instruction.
2. After re-start your computer; at prompt of asking for ICHxIDE.CAT, please points to C:\WINDOWS\
Chapter 4

Driver Installation

41