9 Mounting the Cutting Attachment
8.2
Fitting the Skirt and Blade
WARNING
Risk of injury from thrown objects and contact
with the cutting attachment. These parts must be
fitted to the deflector (1) when you use a mowing
head.
8.3
Fitting the Skirt
► Slide the lower guide slot of the skirt onto the
deflector – it must snap into position.
8.4
Removing the Skirt
2.
► Insert the stop pin into the hole in the skirt and
use it to push the skirt to the left.
► Pull the skirt off the deflector.
8.5
Mounting the Blade
► Slide the line limiting blade into the guide on
the skirt.
► Insert the screw and tighten it down firmly.
0458-593-8321-C
9
Mounting the Cutting
Attachment
9.1
► Shut off the engine.
► Lay your power tool on its back so that the cut‐
ting attachment mounting face is pointing up.
9.2
The mounting hardware supplied depends on the
cutting attachment that comes as original equip‐
ment with the new machine.
9.2.1
Mowing heads and metal cutting attachments
may be mounted.
1.
Placing power tool on the
ground
Mounting Hardware for Cutting
Attachments
Machine supplied with mounting hard‐
ware
3
4
1
2
English
5
17