Table of Contents
Advertisement
Protection Feature List
No.
Abnormality
1
Temperature
2
3
Battery Charge
4
Spill Containment
5
Spill Containment
6
Fluid Overflow
7
Overload
8
Terminal Cover Open
9
OVER CRANK
10
Rotation signal loss
* indicates the automatic activation.
10. Inspection/Maintenance
10. Inspection/Maintenance
WARNING
Batteries, battery posts, terminals and related accessories contain lead and lead
compounds, and other chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. WASH HANDS AFTER HANDLING.
WARNING : ELECTRIC SHOCK/INJURY
Do not touch output terminals or internal electric parts while the generator is operating.
Do not open the inspection door when the starter switch is in the AUTO or START
position. It may get caught in rotating parts such as cooling fans and fan belt.
Always turn the starter switch to the STOP position and stop the engine, then close and
lock OPERATION PANEL DOOR before checking or maintaining the engine.
Do not lift up using tie downs. Use of such could result in the generator falling.
No persons should be under a suspended generator at all the time.
Action
Breaker
Trip
High Water
−
Low Oil
−
Pressure
Insufficient
−
Engine
−
Overspeed
−
Fluid Level
Overflow
−
−
−
California Proposition 65
Engine
Warning
Automatic
Lamp
Shutdown
Flash
Activates due to high water temperature
in the engine
Default 239°F （115℃）
Activate due to low oil pressure in the
engine
Default 14 psi （0.98 × 100 kPa）
Activates in battery charge Impossible
Engine speed is too fast
（4,140 rpm or more）
Spill containment accumulated fluid has
−
exceeded the specified level making it
necessary to flush the fluid.
Spill containment accumulated fluid has
exceeded the specified level making it
near the fill.
−
−
Activates in overload
Activates when terminal cover is
−
−
opened.
−
Engine startup failure
Flashing
When rotation signal disappears
32
Cause
Advertisement
Table of Contents
