Table of Contents
Advertisement
(2) Double-Stacking Storage Procedures
WARNING : INJURY
Always be sure to observe the following items when double stacking this generator in a
warehouse or similar location.
Check that the hood of this generator is not dented,
and that bolts are not loose or missing.
Set in a location with a flat hard floor capable of
withstanding the double-stacking weight.
Always be sure to use lifting hooks when lifting this
generator.
Insert wood ties of the same size and that are wider
than this generator between each generator, and set
another generator on top of the ties.
Never stack more than two levels, and do not set a generator
on top that is larger in weight/size than that on the bottom.
Do not operate the generator when it is double stacked.
12.Troubleshooting
WARNING : ELECTRIC SHOCK/INJURY
Do not touch output terminals or internal electric parts while the generator is
operating.
Do not open the inspection door when the starter switch is in the AUTO or
START position. It will cause injury by rotating parts such as cooling fans and
fan belts.
Always turn the starter switch to the STOP position and stop the engine, then
close and lock OPERATION PANEL DOOR before checking or maintaining the
engine or any equipment.
CAUTION : FIRE
Never allow flame to come closer to the generator.
CAUTION : BURNS
Do not touch the engine and muffler after stopping the engine as they are still
extremely hot.
Inspect this generator when operation is poor to determine the fault/malfunction.
Request the authorized distributor where the generator was purchased to perform
maintenance if you cannot find any faults/malfunctions during inspection.
43
Advertisement
Table of Contents
