Sharp MX-C507F User Manual page 62

Understanding the printer menus
Menu item
Device Operations
Safe Mode
Off*
On
Device Operations
Minimum Copy Memory
80 MB*
100 MB
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
Off
On*
Device Operations
Honor orientation on fast path copy
Off*
On
Device Operations
Automatic Media Type Detection
Off
On*
Device Operations
Enable Optional Parallel Port
Off*
On
Toner patch sensor setup
Calibration frequency preference
Disabled
Fewest color adjustments
Fewer color adjustments
Normal*
Better color accuracy
Best color accuracy
Toner patch sensor setup
Full calibration
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Set the minimum memory allocation for storing copy jobs.
Erase user‑defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Enable the printer to use the orientation setting under the Copy
menu when sending quick copy jobs.
Set the printer to detect the paper type of a page being loaded.
Enable the optional parallel port.
Set the printer to put down the correct amount of toner to
maintain color consistency.
Run the full color calibration.
62