Sharp MX-C507F User Manual page 56

Understanding the printer menus
Menu item
Copy
Sides (1 sided to 1 sided*)
Pages per Side (Off*)
Darkness (5*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Remote Operator Panel
Menu item
External VNC Connection
Don't Allow*
Allow
Authentication Type
None*
Standard Authentication
VNC Password
Note: An asterisk (*) next to a value indicates the factory default setting.
Notifications
Menu item
Error Lighting
Off
On*
ADF Loaded Beep
Off
On*
Alarm Control
Off
Single*
Continuous
Supplies
Show Supply Estimates (Show estimates*)
Cartridge Alarm (Single*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the copy settings of the printer.
Description
Connect an external Virtual Network Computing (VNC) client
to the remote control panel.
Set the authentication type when accessing the VNC client
server.
Specify the password to connect to the VNC client server.
Note: This menu item appears only if Authentication Type is
set to Standard Authentication.
Description
Set the indicator light to come on when a printer error occurs.
Note: This menu item appears only in some printer models.
Enable a sound when loading paper into the ADF.
Set the number of times that the alarm sounds when the printer
requires user intervention.
•
Show the estimated status of the supplies.
•
Set the number of times that the alarm sounds when the
toner cartridge is low.
56