Sharp MX-C507F User Manual page 100

Understanding the printer menus
Menu item
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
Network Name
Network Mode (Infrastructure*)
Wireless Security Mode (Disabled*)
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Enable Wi‑Fi Direct
On
Off*
Compatibility
802.11b/g/n (2.4GHz)
802.11a/b/g/n/ac (2.4GHz/5GHz)*
802.11a/n/ac (5GHz)
Wireless Security Mode
Disabled*
WEP
WPA2/WPA-Personal
WPA2-Personal
802.1x - RADIUS
IPv4
Enable DHCP (On*)
Set Static IP Address
IPv6
Enable IPv6 (On*)
Enable DHCPv6 (Off*)
Stateless Address Autoconfiguration (On*)
DNS Server Address
Manually Assigned IPv6 Address
Manually Assigned IPv6 Router
Address Prefix (64*)
All IPv6 Addresses
All IPv6 Router Addresses
Network Address
PCL SmartSwitch
Off
On*
Description
Configure the wireless connection using the control
panel.
Establish a Wi‑Fi network and enable network security.
Enable Wi-Fi Direct‑capable devices to connect to the
printer.
Specify the standard for the Wi‑Fi network.
Set the security mode for connecting the printer to Wi‑Fi
devices.
Configure the IPv4 settings.
Configure the IPv6 settings.
Specify the network address.
Set the printer to switch automatically to PCL emulation
when a print job requires it, regardless of the default
printer language.
Note: When this setting is disabled, the printer does
not examine incoming data and uses the default printer
language specified in the Setup menu.
100