Symbols On The Equipment - Grizzly MTS 52-15 E2 Translation Of The Original Instructions For Use

Symbols on the Equipment

On the equipment, there are information symbols. These convey important information
about the product or information about its use.
• Caution: Special safety measures are required when handing the equipment!
• The entire operating instructions must be read and understood before use. Non-
observance of the operating instructions may be fatal!
Read the operating instructions
carefully.
Wear eye protection.
Wear head protection.
Wear ear protection.
Wear protective
Wear safety boots with sturdy
soles.
Maintain a safety distance of min.
15 m from others.
Danger from parts being thrown
out! Keep away from other people.
Fuel and fuel vapours are inflam-
mable. Risk of fire and explosion!
Caution! Danger!
Keep other people away. Discon-
tinue work, if in close proximity.
Caution! Spring-back - Be careful
of spring-back of the machine dur-
ing work.
gloves.
Caution! Hot surfaces –
risk of burns!
Do not touch cutter.
Caution! Risk of injury from
cuts. Keep hands away.
Symbol on the fuel pump:
Press the fuel pump 6x before
starting
Symbols on fuel tank:
Mix ratio 40:1,
700
Use ONLY fuel mix.
Caution - Poisonous CO vapours!
Do not operate device in closed
rooms.
Caution - Petrol is flammable!
Do not smoke and keep heat
sources away.
Symbol on the choke lever
Lever in cold start position (START)
Lever in warm start position (RUN)
Specification of the guaranteed
sound power level L
GB
Cutting circle
in dB.
WA
97