Installing/Removing The Reel Capsule - Grizzly MTS 52-15 E2 Translation Of The Original Instructions For Use

Installing the metal cutting blade (pic. 5):
3. Place the metal cutting blade (18) and
flanges (33a+b) on the cutting head
holder (19) in the following order:
Bottom flange (33a) – metal cutting
blade (18) – top flange (33b).
4. Screw on the metal cutting blade (18)
anticlockwise
nut (35) and with the aid of the main-
tenance key (see pic. 6, no. 26).
Insert the cotter pin (19a)
pic 5
20
Removing the metal cutting blade (pic. 6):
pic 6
33a
25
using the fixing
35
33b
18
33a
34
19a
19
26
33b
18
19
5. To lock the axle, push the enclosed
metal pin (25) sideways into the hole
provided on the cutting head holder
(19) and on the bottom flange (33a).
6. Unscrew the fixing nut clockwise with
the aid of the maintenance key (26)
and remove the top flange (33b) and
the metal cutting blade (18).
Installing/Removing
the Reel Capsule
(Pic. 7)
Dismantling the metal cutting blade is
described in the section on "Installing/
Removing the Metal Cutting Blade".
Installing the protective cover/thread reel:
1. Screw the protective cover / reel cap-
sule (15) onto the protective cover /
metal cutting blade (20) using the 3
screws (36) enclosed.
Installing the reel capsule:
2. Screw the reel capsule (16) anticlock-
wise
onto the cutting head holder
by hand, as indicated in the diagram.
3. Remove the protective cap on the
thread cutter (14).
Removing the reel capsule:
4. Unscrew the reel capsule (16) clock-
wise
by hand. To make the work
easier, the cutting head holder (19) and
bottom flange (33a) can be locked using
the enclosed metal pin (see also pic. 6).
pic 7
15
14
36
GB
20 16
19
33a
101