Card Reader Board - HP EliteBook 845 G7 Maintenance And Service Manual

3. Remove the speakers from the computer (3) .
Reverse this procedure to install the speakers.

Card reader board

To remove the card reader board, use this procedure and illustration.
Table 6-4 Card reader board description and part number
Description
Card reader board
Card reader board cable (included in Cable Kit)
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the left speaker (see
Remove the card reader board:
1. Disconnect the cable from the reverse ZIF connector on the card reader board (1).
2. Remove the three Phillips M2.0 × 2.0 screws (2) that secure the board to the computer.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 43).
Speakers on page 46).
33).
Component replacement procedures
Spare part number
M07105-001
M07101-001
33).
47