Table of Contents
Advertisement
The hinges are available in the Hinge Kit as spare part number M07104-001.
10.
If you need to remove the display panel:
a.
Check the fit of the various alignment tools on the display assembly. Make note of the best fitting
alignment tool to use when replacing the display panel.
b.
The display panel is secured to the display enclosure with tape that is installed under the left and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape (1). While
turning the tweezers, wrap the tape around the tweezers (2) as you continue to pull the tape out
from behind the display panel (3). You must pull the tape multiple times before it is completely
removed.
Component replacement procedures
63
Hide quick links:
Advertisement
Table of Contents
