HP EliteBook 845 G7 Maintenance And Service Manual page 70

3. Disconnect the battery cable from the system board (see
4. Remove the power connector cable
Remove the display assembly:
1. Disconnect the display cable (1) and remove it from the clip (2).
2. Disconnect the antenna cables from the WWAN module (3), and then remove the cables from the clip
(4).
3. Disconnect the antenna cables from the WLAN module (5) and disconnect the left display cable (6), and
then remove the cables from the clips along the side of the fan (7).
4. Remove the six Phillips M2.5 × 4.0 screws (1) that secure the display assembly to the computer.
5. Rotate the display to open the hinges (2).
60 Chapter 6 Removal and replacement procedures for authorized service provider parts
Battery on page
(Power connector cable on page
43).
48).