Nfc Module; Fan - HP EliteBook 845 G7 Maintenance And Service Manual

NFC module

To remove the NFC module, use this procedure and illustration.
Table 6-9 NFC module description and part number
Description
NFC module
NFC module cable (included in Cable Kit)
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the NFC module:
1. Disconnect the system board cable from the ZIF connector on the NFC module (1).
2. Disconnect the touchpad cable from the reverse ZIF connector on the NFC module (2).
3. Use a tool to release the module (3), and then remove the module from the computer (4). The module is
secured with adhesive.
Reverse this procedure to install the NFC module.

Fan

To remove the fan, use this procedure and illustration.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 43).
33).
Component replacement procedures
Spare part number
M07214-001
M07101-001
33).
53