Table of Contents
Advertisement
22.
If you need to remove the second ambient light sensor cables, disconnect the cable from the ZIF
connectors on the second ambient light sensor (1) and hub board (2), and then peel the cables off the
inside of the display back cover to remove them (3).
The second ambient light sensor cable is available in the Cable Kit as spare part number M07101-001.
Display back covers are available as the following spare part numbers:
M07098-001: Models with WWAN, 250 nits
M07099-001: Models with WWAN, 400 nits
M07096-001: Models without WWAN, 250 nits
M07097-001: Models without WWAN, 400 nits
23.
Use the following illustration to determine proper cable routing. The WWAN antenna cables and display
cable route through the right hinge (1). The WLAN antenna cables and display cable route through the
left hinge (2).
74
Chapter 6 Removal and replacement procedures for authorized service provider parts
Hide quick links:
Advertisement
Table of Contents
