Stihl MS 462 C-M Instruction Manual page 68

English
– Carburetor (if applicable)
– Clamps
– Control Linkages
– Cylinder
– Fly Wheel
– Fasteners
– Fuel Cap
– Fuel Line
– Fuel Line Fittings
– Fuel Pump
– Fuel Tank
– Intake Manifold
– Magneto or Electronic Ignition System (Ignition Module or
Electronic Control Unit)
– Muffler
– Spark Plug
– Catalytic Converter (if applicable)
– Choke (Cold Start Enrichment System) (if applicable)
– Injection Pump (if applicable)
– Injection Valve (if applicable)
– Throttle Housing (if applicable)
Where to Make a Claim for Warranty Service
Bring the product to any authorized STIHL servicing dealer
and present the signed warranty card.
Maintenance Requirements
The maintenance instructions in this manual are based on
the application of the recommended 2-stroke fuel-oil mixture
(see also instruction "Mixing Fuel"). Deviations from this
recommendation regarding quality and mixing ratio of fuel
and oil may require shorter maintenance intervals.
66
Limitations
This Emission Control Systems Warranty shall not cover any
of the following:
– repair or replacement required because of misuse,
neglect or lack of required maintenance,
– repairs improperly performed or replacements not
conforming to STIHL Limited specifications that adversely
affect performance and/or durability, and alterations or
modifications not recommended or approved in writing by
STIHL Limited,
– replacement of parts and other services and adjustments
necessary for required maintenance at and after the first
scheduled replacement point.
29 Emission Control Warranty
0458-790-8221-A