Replacement Parts And Equipment; Genuine Stihl Replacement Parts; Disposal; Disposal Of The Power Tool - Stihl MS 462 C-M Instruction Manual

English
The guide bar and chain combinations listed above meet the
45° computed kickback angle requirement of CSA Z62.3
when used on this model chain saw with the matching chain
sprocket listed above.
Use replacement guide bars or chains only as listed above
or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of CSA Z62.3 when
used on this model chain saw.
The listed guide bars are green-labeled reduced kickback
STIHL guide bars. The listed chains are green-labeled low
kickback STIHL chains.
Since new bar/chain combinations may be developed after
publication of this manual, ask your authorized STIHL
servicing dealer for the latest STIHL recommendations.

27 Replacement Parts and Equipment

27.1 Genuine STIHL Replacement Parts

STIHL recommends the use of genuine STIHL replacement
parts. Genuine STIHL parts can be identified by the STIHL
part number, the
STIHL parts symbol . The symbol may appear alone on
small parts.

28 Disposal

28.1 Disposal of the Power Tool

STIHL products must not be thrown in household trash or
disposed of except as outlined in this manual.
► Take the power tool, accessories and packaging to an
approved disposal site for environmentally friendly
recycling.
► Contact your authorized STIHL servicing dealer for the
latest information on disposal and recycling.
64
logo and, in some cases, by the
27 Replacement Parts and Equipment

29 Emission Control Warranty

29.1 STIHL Limited Federal Emission Control

Warranty Statement

This statement is given voluntarily, based on the MOU
(Memorandum of Understanding) as agreed in April 1999
between Environmental Canada and STIHL Limited.
Your Warranty Rights and Obligations
STIHL Limited is pleased to explain the Emission Control
System Warranty on your equipment type engine. In Canada
new 1999 and later model year small off-road equipment
engines must be designed, built and equipped, at the time of
sale, to meet the U.S. EPA regulations for small non road
engines. The equipment engine must be free from defects in
materials and workmanship which cause it to fail to conform
with U.S. EPA standards for the first two years of engine use
from the date of sale to the ultimate purchaser.
STIHL Limited must warrant the emission control system on
your small off-road engine for the period of time listed below
provided there has been no abuse, neglect or improper
maintenance of your small off-road equipment engine.
Your emissions control system may include parts such as
the carburetor or fuel-injection system, the ignition system,
and catalytic converter. Also included may be hoses, belts,
connectors or other emission-related assemblies.
Where a warrantable condition exists, STIHL Limited will
repair your small off-road equipment engine at no cost to
you, including diagnosis (if the diagnostic work is performed
at an authorized dealer), parts, and labor.
Manufacturer's Warranty Coverage
In Canada 1999 and later model year small off-road
equipment engines are warranted for two years. If any
emission-related part on your engine is defective, the part
will be repaired or replaced by STIHL Limited free of charge.
0458-790-8221-A