Operation; Specifications; Warranty - Napa Carlyle Tools 6-1037A Instruction Manual

OPERATION

Always turn off the air supply, drain
hose of air pressure and detach
tool from air supply before install-
ing, removing or adjusting any part
or accessory on this tool, or before
performing any maintenance on
this tool.
Tire buffing wheels or rasps can be
mounted providing their speed rating
exceeds the speed of the Tire Buffer
and the thread size of the mounted
accessory must match the size of the
quick change adapter.
After mounting a new tire buffing
wheel or rasp, start the Tire Buffer
under bench and run for a few sec-
onds. If the Tire Buffer starts to
vibrate when first fitting a mounted
tire buffing wheel or rasp, or during
operation, immediately remove from
service. If Tire Buffer is dropped,
replace the tire buffing wheel or
rasp.

WARRANTY

Important: DO NOT RETURN DEFECTIVE PRODUCT OUTSIDE OF ORIGINAL ONE (1) YEAR WARRANTY PERIOD TO
PLACE OF PURCHASE.
WARRANTY POLICY:
from the date of original purchase. We will replace, at our option, any part which proves to be defective in material or workman-
ship. Repairs or replacements are warranted as described above for the duration of the original warranty period. In the unlikely
event a replacement unit is required during this One (1) year period, return the unit to your local NAPA Auto Parts Store for a
replacement. This warranty does not apply to products which have been subjected to abuse, misuse, modification, neglect, lack of
maintenance, use in a production-related service, or repaired by anyone other than an Authorized Carlyle Air Tool Service Center.
For complete listing of Authorized Master Repair Centers, see enclosed Customer Warranty Repair Form, or
visit www.toolwarrantyrepair.com
PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE THIS MAN U AL FOR FUTURE REF ER ENCE.
6-1037A
When using the Tire Buffer, be careful
not to exert excessive force which
could be hazardous and cause
mounted quick change adapter to
bend or break.
Correct buffing wheel mounting is
necessary to prevent injury from bro-
ken buffing wheels or rasps. Do not
use chipped or cracked
wheels or rasps. Tire buffer wheels
and rasps should be a free fit on the
quick change adaptor to prevent
stress at the hole. Tighten the buff-
ing wheel on the quick change adapt-
er to prevent spin off when the air
buffer is turned off.
NOTE:
goggles should always be worn to
guard against flying debris (users
and bystanders).
Never mount grinding wheels,
cut-off wheels or drill bits.
This Carlyle Air Tool is warranted against defects in material and workmanship for a period of One (1) Year
buffing
During operation, safety
5

Specifications

Horsepower .............................. 0.5HP
Overall Length ............................. 9.2"
Width ......................................... 2.36"
Weight .................................... 1.8 lbs.
RPM .................................. 2,600 RPM
Chuck Size ................................ 7/16"
Sound Level ............................ 78dBa
Vibration Level ....................... 0.6m/s2
Air Consumption ................... 3.1CFM
Air Inlet Thread Size .......1/4"-18 NPT
Recommended Hose Size ....3/8" I.D.
Recommended
Air Pressure ................. 90psi (6.2 bar)
Rev. 09/09/19