Napa Carlyle Tools 6-1037A Instruction Manual page 2

FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
THIS INSTRUCTION
CONTAINS IMPORTANT SAFETY
INFORMATION.
READ THIS INSTRUCTION
CAREFULLY AND UNDERSTAND
INFORMATION BEFORE OPERATING THIS
TOOL.
• Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire, explosion
and/or serious personal injury. It is the
responsibility of the owner to make sure all
personnel read this manual prior to using
the device. It is also the responsibility of the
device owner to keep this manual intact and in
a convenient location for all to see and read.
If the manual or product labels are lost or not
legible, contact NAPA for replacements. If the
operator is not fluent in English, the product
and safety instructions shall be read and
discussed with the operator in the operator's
native language by the purchaser/owner or
his designee, making sure that the operator
comprehends its contents.
• Always operate, inspect and maintain
this tool in accordance with American
National Standards Institute Safety Code of
Portable Air Tools (ANSI B186.1) and any
other applicable safety
regulations.
• For safety, top performance and
maximum durability
parts, operate this tool at 90
psig; 6.2 bar max air pressure
with 3/8" diameter air supply
hose.
• Always wear impact-resistant
eye, face & hand protection when
operating or
maintenance on this tool (users
and bystanders).
• High sound levels can cause
permanent hearing loss. Always
use hearing
recommended by your employer
an OSHA regulations while using
this tool (users and bystanders).
• Keep the tool
operating condition.
• Operators and maintenance personnel
must be physically able to handle the bulk,
weight and power of this tool.
• Air under pressure can cause
severe injury. Never direct air
at yourself or others. Always
turn off the air supply, drain
hose of air
detach tool from air supply
before installing,
or adjusting
on this tool, or before performing
any maintenance on this tool.
Failure to do so could result in injury. Whip
hoses can cause serious injury. Always check
for damaged, frayed or loose hoses and
6-1037A
MANUAL
fittings, and replace immediately. Do not use
quick detach couplings at tool. See instructions
for correct set-up.
MANUAL • Keep tool out of reach of children.
ALL
periods of time may be harmful to your hands
and arms. Discontinue use of tool if discomfort,
tingling feeling o pain occurs. Seek medical
advice before resuming use.
death. Be aware of excess hose left on the walking
or work surface.
• Keep body working stance balanced and
firm. Do not overreach when operating the
tool.
• Do not point or indulge in any horseplay with
this tool.
• Anticipate and be alert for sudden changes in
motion during start up and operation of any
power tool.
codes and
• Tool shaft may con tin ue to ro tate brief ly af ter
throt tle is re leased. Avoid di rect con tact
with ac ces so ries dur ing and af ter use. Gloves will
of
re duce the risk of cuts or burns.
Scalping can occur if hair is not kept away
from tool and accessories. Choking can occur
if neckwear is no kept away from tool and
performing
accessories.
• Do not use (or modify) the tool for any other
purpose than that for which it was designed
without
authorized representative.
protection as
• Correct buffing wheel mounting is necessary
to prevent injury from broken buffing wheels
or rasps.
buffing wheels or rasps. Tire buffer wheels
in efficient
and rasps should be a free fit on the quick
change adaptor to prevent stress at the hole.
Tighten the buffing wheel on the quick change
adapter to prevent spin off when the air buffer
is turned off.
RPM RPM RPM
• Never mount grinding wheels, cut-off
pressure and
wheels or drill bits.
• Use accessories recommended by NAPA
removing
Tools.
any accessory
WARNING
• Air powered tools can vibrate
in use. Vibration, repetitive motions or
uncomfortable positions over extended
• Slipping, tripping
or falling while operating air tools can
be a major cause of serious injury or
• Do not carry tool by the hose.
Protect the hose from sharp
objects and heat.
• Keep away from
end of tool. Do not wear jewelry or
loose clothing Secure long hair.
consulting the manufacturer's
Do not use chipped or cracked
• Use accessories rated at 2,600
RPM or higher.
• Do not lu bri cate tools
flam ma ble or vol a tile liq uids such
as ker o sene, die sel or jet fuel.
2
• This
against
• This tool must not be used in
explosive atmospheres
• Servicing and repairs should only
be made
service center.
• Do not force tool beyond its rated
capacity.
• Do not remove any labels. Replace
damaged labels.
and
• Do not lock, tape or wire the "on/off"
safety lever in the "on" position, as the
lever must be free to return to the "off"
position when released.
• Failure to heed these warnings may reusult
in personal injury and/or property damage.
WARNING:
expose you to chemicals including
nickel which is known to the State of
California to cause cancer and birth defects or
other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
rotating
with
tool is not insulated
electric shock.
by an authorized
This product can
Rev. 09/09/19