GE EML835 Owner's Manual page 23

How to Delay the Start of Cleaning
Touch the CLEAN pad.
Using the number pads, enter the
desired clean time, if a time other than
4 hours, 20 minutes is needed.
You can change the clean time to any time
between 3 hours and 5 hours, depending on
how dirty your oven is.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with
thoroughly with a vinegar and water
mixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
Touch the START TIME pad.
Using the number pads, enter the time
of day you want the clean cycle to start.
Touch the START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED
When the LOCKED
able to open the door.
You cannot set the oven for cooking or
another self-clean cycle until the oven
is cool enough for the door to unlock.
While the oven is self-cleaning, you
can touch the CLOCK pad to display
the time of day. To return to the clean
count down, touch the COOK TIME
pad.
If the racks become hard to slide, apply
a small amount of cooking oil to a
paper towel and wipe the edges of the
oven racks with the paper towel.
23