Kohler VEIL K-5402A-0 Installation Instructions Manual page 16

4. Align control panel in position, the push forward and fasten.
Install motor assembly signal wire and control panel signal
wire into U type hole of splash plate, as shown below.
5. Once connected to the power and water supply, the toilet
is ready for use.
1. Dismantle the control pan, as shown.
Hold control panel bottom with both hands and push
upward to open the panel. Open from the bottom up.
Dismantly motor assembly signal wire and control panel
signal wire.
1266554-A02-A 16 Kohler Co. March 2016