Table of Contents
Advertisement
User-Programmable Passive Door Lock
The system will not automatically lock the doors when the alarm passively
arms to prevent the keys and remote from accidentally being locked in the
vehicle. If you prefer, you can easily program the system to automatically lock
the doors every time the alarm passively arms. (See the "Programming Table
for System Features" on page 10.)
User-Programmable Ignition-Controlled Door Lock/Unlock
For the ultimate in security and convenience, the system will automatically
lock the doors when the ignition key is turned "ON" or when the vehicle
engine is started and the doors will unlock when the ignition key is turned
"OFF." This feature can be programmed on or off. (See the "Programming
Table for System Features" on page 10.)
Remote Panic with Safety Locks™
In a threatening situation, you can activate Remote Panic with Safety Locks.
When activated, the siren will sound continually and the parking lights will
flash on and off. If the ignition key is "OFF," the doors will unlock. If the
ignition key is "ON," the doors will lock. To deactivate, press button #1 for 1-2
seconds.
LED System Status Indicator
The LED on your vehicle's dashboard or center console will inform you of the
system status.
LED
Status
Off
System is disarmed
On solid
In Protected or Remote-Controlled Valet Mode
Slow flash
System is armed
Flashing in cycles
See "Specific Zone Intrusion Identification" on page 8
Rapid flash
Passive Arming
Previous Intrusion Alert
If the vehicle had been tampered with and the alarm has been triggered, the
siren will chirp 3 times upon remote disarm instead of the usual 1 chirp.
7
2
Bandido
Owner's Manual
Advertisement
Table of Contents
