1. Manuals
  2. Brands
  3. Avital Manuals
  4. Car Alarm
  5. Bandido 2
  6. Owner's manual

Avital Bandido 2 Owner's Manual

Remote-controlled vehicle security system with anti-carjacking
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2
Bandido
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Avital Bandido 2

Summary of Contents for Avital Bandido 2

  • Page 1 Bandido Owner's Manual...

  • Page 2: Table Of Contents

    Table of Contents Bandido ........1 Lifetime Warranty ......1 Anti-Carjacking.

  • Page 3: Bandido

    Congratulations! You have just purchased the Bandido security system with anti-carjacking manufactured by Avital Technologies, Inc. To fully benefit from the capabilities of your system, we encourage you to read the Owner’s Manual thoroughly before using the system. If you have any problems or questions regarding your system, consult the dealer from whom you purchased this product.

  • Page 4: Electronic Scan Prevention (Esp)

    The Bandido system can accept up to four Avital remote controls. Additional remote controls and remote control batteries can be purchased from any authorized Avital dealer, or by calling Avital Technologies at 1-800-253-0334 (toll-free within the U.S. only) or 1-847-215-2233. In Mexico, dial 525-605-8541.

  • Page 5: Operating Your Bandido System

    Operating Your Bandido System To Arm the Alarm System Your alarm system can be programmed for active or passive arming. Active arming means the system can only be armed with the remote control. Passive arming means the system will automatically arm itself. (See the "Programming Table for system Features"on page 10.) Active Arming: Press remote button #1 for 1-2 seconds.

  • Page 6: To Activate The Anti-Carjacking Feature

    Engine Shut Down Mode: After the parking lights have flashed for 10 seconds, the siren will sound and the parking lights will continue to flash. The system will monitor the engine RPM's. When the carjacker stops or slows for a turn, the engine will automatically shut off and not allow the vehicle to be restarted.

  • Page 7: Remote-Controlled Silent Arm/Disarm

    Remote-Controlled Silent Arm/Disarm Press the remote button #3 for 1-2 seconds to arm or disarm your system without the usual siren chirps. Silent Arm Indications: The parking lights will flash twice, the doors will lock, the starter will be disabled and the LED will flash slowly. Silent Disarm Indications: The parking lights will flash once, the doors will unlock, the starter will be enabled and the LED will turn off.

  • Page 8: Protected Valet Mode

    Protected Valet Mode You can place your system in Protected Valet Mode when your car is being serviced by mechanics, car wash personnel or driven by valet attendants, and still maintain possession of your remote control(s). While in Protected Valet Mode, all alarm functions are bypassed to prevent undesired or accidental arming.

  • Page 9: User-Programmable Passive Door Lock

    User-Programmable Passive Door Lock The system will not automatically lock the doors when the alarm passively arms to prevent the keys and remote from accidentally being locked in the vehicle. If you prefer, you can easily program the system to automatically lock the doors every time the alarm passively arms.

  • Page 10: Specific Zone Intrusion Identification

    Specific Zone Intrusion Identification If the alarm had been triggered in your absence, the siren will chirp 3 times upon remote disarm (Previous Intrusion Alert). When you enter the vehicle and turn the ignition “ON,” the LED will flash in cycles to specifically identify which zone triggered the system.

  • Page 11: User-Programmable Features

    User-Programmable Features All system and remote control programmable features are accomplished by turning the ignition key "ON" (or starting the engine) and flicking the valet switch on and off a preset number of times. The Bandido also allows you to add new remote controls in one step, delete lost or stolen remote controls or rearrange the factory preset remote control functions.

  • Page 12: Programming Table For System Features

    Programming Table for System Features Factory No. of Feature Setting Chirps Active/Passive Passive Arming Passive Door Lock Passive Armed Confirmation Long-Term Silent Arm/Disarm Ignition-Controlled Door Lock/Unlock Acitve/Passive Activation of Passive Anti-Carjacking Programming Table for Remote Controls Factory Feature Setting Arm/Disarm, Channel 1 Button 1 Remote Panic...

Table of Contents