D-Link DWL-7200AP Manual page 46

Using the AP Manager (continued)
Device Configuration>Filters
• Internal Station Connect Cross 11a, 11g: Enabling this allows wireless
IEEE802.11a and IEEE802.11g clients to communicate with each other. When this
option is disabled, IEEE802.11a and IEEE802.11g wireless stations are not allowed
to exchange data through the access point.
The following features are configurable in IEEE802.11a & IEEE802.11g:
• Internal Station Connection: Enabling this allows wireless clients to communicate
with each other. When this option is disabled, wireless stations are not allowed to
exchange data through the access point.
• Broadcast from Ethernet to WLAN: Enabling this option allows Ethernet devices
to communicate with wireless clients. When this option is disabled, all data from
Ethernet to wireless clients is blocked. Wireless devices can still send data to the
Ethernet devices when this is disabled.
• Access Control: When disabled access control is not filtered based on the MAC
address. If Accept or Reject is selected, then a box appears for entering MAC
addresses. When Accept is selected, only devices with a MAC address in the list
are granted access. When Reject is selected, devices in the list of MAC addresses
are not granted access.
46