D-Link DWL-7200AP Manual page 15

802.11a/802.11g dualband wireless 108mbps access point with poe

Hide thumbs Also See for DWL-7200AP:

Table of Contents

Using the Conﬁguration Menu (continued)

Home > LAN

LAN is short for Local Area Network. This is considered your internal network. These

are the IP settings of the LAN interface for the DWL-7200AP. These settings may be

referred to as private settings. You may change the LAN IP address if needed. The LAN

IP address is private to your internal network and cannot be seen on the Internet.

Get IP From-

IP Address-

Subnet Mask-

Default Gateway-

Apply-

Select Static (Manual) or Dynamic (DHCP) as the method you

will use to assign an IP address to the DWL-7200AP.

The IP address of the LAN interface. The default IP address

is: 192.168.0.50

The subnet mask of the LAN interface.

The default subnet mask is 255.255.255.0

This ﬁeld is optional. Enter in the lP address of the router on

your network.

Click Apply to save the changes.

Table of Contents

Airpremier dwl-7200ap