D-Link DWL-7200AP Manual page 26

Using the Configuration Menu (continued)
Advanced > Grouping
AP Grouping Settings
When you Enable
wireless network traffic and wireless clients among the DWL-7200APs in the
network. Assign each access point a different non-overlapping channel (e.g.,
1, 6, 11).
User Limit: Set the User Limit in this field (0-64).
Link Integrity: Select Enabled or Disabled.
When Link Integrity is Enabled, whenever the Ethernet connection
between the LAN and the AP is disconnected - then the wireless segment
associated with the AP will also be disconnected from the AP.
Ethernet Link Status:
that there is an Ethernet LAN connection to the AP.
Apply: Click Apply if you have made any changes.
you allow several DWL-7200APs to balance
Load Balance
This field displays the Ethernet Link Status. Link Up indicates
26