Getting Started - D-Link DWL-7200AP Manual

Getting Started

Right out of the box, with its default settings, the DWL-7200AP will automati-
cally connect with other D-Link AirPremier
Note: If you are using a DHCP-capable router in your network you will not
need to assign a static IP address.
If you need to assign IP addresses to the computers on the network, please
remember that the IP address for each computer must be in the same IP
address range as all the computers in the network, and the subnet mask
must be exactly the same for all the computers in the network.
For example: If the first computer is assigned an IP address of 192.168.0.2 with a
subnet mask of 255.255.255.0, then the second computer can be assigned an IP
address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP
address, one or more of the devices may not be visible on the network.
On the following pages we will show you an example of an Infrastructure Network
incorporating the DWL-7200AP.
An Infrastructure network contains an access point or a wireless router. The
Infrastructure Network example shown on the following page contains the following
D-Link network devices (your existing network may be comprised of other devices):
 A wireless access point -
D-Link AirPremier™ AG DWL-7200AP
An Ethernet router - D-Link DI-604

A laptop computer with a wireless adapter -

D-Link AirPremier
A desktop computer with a wireless adapter -

D-Link AirPremier
 A cable modem - D-Link DCM-201
TM
IP ADDRESS
AG DWL-AG660
TM
AG DWL-AG530
TM
11
AG products.