D-Link DWL-7130AP - xStack - Wireless Access Point Overview

AP Features:
+ Support for 802.11a/b/g
- DWL-7130AP and DWL-7230AP
+ External 2dBi or 5dBi Antenna Included
+ 10/100Mbps Ethernet Interface
+ PoE Powered
- DWL-2230AP and DWL-7230AP
+ Removable Antenna
(excluding DWL-7130AP)
IEEE 802.11b
Standard
Radio and Modulation Type
Operating Frequency
Channel Numbers
Data Rate
1
Media Access Protocol
Transmitter Output Power
Receiver Sensitivity
xStack™ Wireless Access Points
Wireless Access Points for DWS-3200 Series Switches
Designed for the xStack 3200 Series of wireless switches,
the DWL-2130AP, DWL-2230AP, DWL-7130AP, and DWL-7230AP
access points (APs) offer a flexible solution for integration
in various network applications. With options for supporting
802.11a/b/g, 802.11b/g only, and Power over Ethernet
(PoE), these APs are designed to fit virtually any network
topology. When used in conjunction with the xStack 3200
Series wireless switch, these APs unlock the power of
wireless switching and facilitate advanced features such
as centralized AP management, seamless Layer 3 roaming,
tunneling between multiple IP subnets, and rogue AP
detection and jamming.
DWL-2130AP DWL-2230AP
IEEE 802.11b IEEE 802.11b
DQPSK, DBPSK, AND CCK DQPSK, DBPSK, AND CCK
2400 ~ 2497MHz ISM Band 2400 ~ 2497MHz ISM Band
11 Channels 11 Channels
11, 5.5, 2, and 1Mbps 11, 5.5, 2, and 1Mbps
CSMA/CA with ACK CSMA/CA with ACK
Typical 18dBm at 11, 5.5, 2 Typical 18dBm at 11, 5.5, 2
and 1Mbps and 1Mbps
-84dBm for 11Mbps -84dBm for 11Mbps
@ 8% PER @ 8% PER
-89dBm @ 5.5Mbps -89dBm @ 5.5Mbps
-90dBm for 2Mbps -90dBm for 2Mbps
@ 8% PER @ 8% PER
-91dBm @ 1Mbps -93dBm @ 1Mbps
Overview
The DWL-7130AP is a dual band access point capable of
supporting users on both 802.11a and 802.11g wireless
standards. The DWL-7230AP provides the same dual band
802.11a/g functionality as the DWL-7130AP, but is also 802.3af
PoE compliant. When used with the xStack DXS/DWS-3227P
PoE enabled switch, power can be provided to the AP over
standard CAT5 Ethernet cabling, eliminating the need for
additional wiring.
The DWL-2130AP and DWL-2230AP (PoE capable model) are
a lower cost solution for networks not needing to support
the 802.11a standard. With support for 802.11b and 802.11g,
these wireless APs are compatible with the industry's most
commonly used wireless network protocol.
DWL-7130AP DWL-7230AP
IEEE 802.11b IEEE 802.11b
DQPSK, DBPSK, AND CCK DQPSK, DBPSK, AND CCK
2400 ~ 2497MHz ISM Band 2400 ~ 2497MHz ISM Band
11 Channels 11 Channels
11, 5.5, 2, and 1Mbps 11, 5.5, 2, and 1Mbps
CSMA/CA with ACK CSMA/CA with ACK
Typical 18dBm at 11, 5.5, 2 Typical 18dBm at 11, 5.5, 2
and 1Mbps and 1Mbps
-85dBm for 11Mbps -85dBm for 11Mbps @ 8%
@ 8% PER PER (Packet Error Rate)
-88dBm for 5.5Mbps -88dBm for 5.5Mbps @ 8%
@ 8% PER PER (Packet Error Rate)
-90dBm for 2Mbps -90dBm for 2Mbps @ 8%
@ 8% PER PER (Packet Error Rate)
-92dBm for 1Mbps -92dBm for 1Mbps @ 8%
@ 8% PER PER (Packet Error Rate)